Whether you need to handle 16 tons of lumber or 50 tons of pipe, our PE-Series line of heavy-duty pneumatic lift trucks are your BIG TRUCK material handling solution.
The PE-Series strikes a unique balance of durability and ergonomics. These lift trucks are engineered to withstand the rugged nature of outdoor applications while providing the operator with maximum comfort and control.
While focusing on robustness and comfort, we also understand that time is money. That’s why each PE-Series is engineered to provide optimal operating efficiency. This truck offers zero emissions, as it is electric powered by an AC drive motor.
Serviceability is another staple of the PE-Series. Routine maintenance and service calls are made easier with the PE-Series’ modular design and easy-access service points. Reach the entire drivetrain, hydraulics and filters by simply lifting the top hood and side panels. The popular hydraulic multi-gauge provides operators and technicians various hydraulic pressure readings with just a twist of the dial.
As with all Hoist Material Handling equipment, the PE-Series is forged in the USA. More than 75% of each truck is manufactured in-house at our East Chicago, Indiana factory with the remaining components sourced from reputable U.S. companies.
22,000 – 36,000 lbs. (10 – 18 tonnes)
115 – 225 in. (3,000 – 6,000 mm)
24 – 48 in. (600 – 1,200 mm)
For maximum performance, an operator must have all the essential tools around them. The PE-Series is designed with advanced ergonomics and safety features for maximum comfort and protection.
- Meets ANSI B56.1 FOPS operator protection
- Low, non-skid steps & handrails provide 3-point contact
- Dashless cab design for additional leg room and improved visibility
- Finger-tip hydraulic controls; optional multi-functional joystick
- Master digital display unit provides onboard diagnostics, vehicle functions and more
- Tilt-steering column with directional/gear-shift lever
- Spring-apply/hydraulic-release parking brake
- Emergency stop button
- Adjustable air-ride seat and retractable seat belts
- Isolated rubber mounts between cab and chassis
- Insulated floor, cab walls and doors
- Lockable doors and greaseable hinges
- Cab heater and operator fan
- Top glass shade with steel overhead guard
- Tinted glass to minimize glare
- Individually controlled front/rear wipers
- 12-volt power outlets
- Air conditioner
- Cold-weather packages
- Battery-disconnect switch
- DVR recorder
- External cab air filtration system
- Extended cab height/riser
- Fire suppression systems; fire extinguishers
- Forward or mid-mount cab position*
- Hydraulic weight scale
- Impact sensor
- Overload protection indicator with lift interrupt
- Pedestrian detection system
- Pre-cleaner intake filter
- Removable counterweight
- Lighting: step lights; additional work lights
- Tires: air-filled, foam-filled or solid
- Tire pressure monitoring system
- Top wipers with wet arms
- Whole-truck camera/monitoring packages
The PE-Series is designed with a wide-open mast and unique low-profile counterweight to provide the operator with unobstructed views in all directions. The PE-Series features overhead tilt cylinders, a two-stage wide-view mast and low-profile carriage.
For ultimate versatility and efficiency, equip your PE-Series with our Quick-Change System. This optional feature allows crews to switch from forks to a coil ram in minutes without removing the pin.
- Pin-mount, machine-contoured forks (high or low position)
- Welded-nested channels with lift cylinders secured directly behind mast rails
- Lift chain and optional attachment hosing located inside inner mast rail
- Main and side thrust rollers are impact-resistant and designed to reduce friction; rollers are properly lubricated and sealed
- Greaseable mast pivots constructed with wear-resistant bronze bushings and hardened steel pins
- Safety valves built into base of lift cylinders for controlled lowering in the event of a hose failure
- Chrome-plated rods on cylinders for easy seal replacement
- Quick-Change System
- Two-stage Hi-Vis or Free-Lift mast
- Three-stage or mono mast
- Side-shifting or independent fork positioner
- Lift/tilt accumulator
- Extended height and width carriages
- Quick-disconnect hydraulic connections
- Additional work lights
- Slope piler
- Coil grab hooks
- Coil ram with side-shift
- Integral coil ram
- Fork-mounted container handler
- Forging/foundry billet grab
- Kissing coil radiused forks
- Lumber forks
- Pallet forks or multi-pallet handler
- Pipe hold-down clamp
- Tire handler
A BIG TRUCK needs robust and reliable power in order to operate effectively and safely. The PE-Series is powered by a high-performance AC drive motor and load sensing hydraulic system, which offer not only power, but also increased productivity and zero emissions.
- AC drive motor
- Electronic engine diagnostics with fault code history
- Built-in engine protection system
- Two-stage heavy-duty air cleaner with electronic restriction indicator
- Heavy-duty isolated anti-vibration bolt-in drive line mounts
- Bolted open-core radiator with high-capacity cooling system
- 100-amp alternator with built-in regulator (amps vary with capacity)
- Easy-access remote-mounted oil filter
- 12-plate modulation for smooth shifting and added durability
- Load-sensing hydraulic system with variable pumps to provide quicker lifting cycles
- Integral safety function prevents engine stalling when hydraulic system is dead-heading
- Tilt-lock valve with counterbalance to prevent mast drift
- Bolt-on hydraulic tank with suction strainers and high-capacity return line filters; large clean-out covers on top for easy access and convenient drain plug on bottom
- Filters are easily accessible for quick replacement
- External sump tank provides additional system cooling
- Hydraulic multi-gauge provides quick and easy pressure readings with a twist of the dial; eliminates the need to tap into hydraulic lines
- Standard 12-volt electrical system
- Color-coded electrical wires enclosed with split-tubing wire loom wrap using sealed weather pack connectors
- Two 12-volt, industrial batteries mounted in easy-access compartment
- Electrical system controls LED headlights, tail lights, turn signals, backup lights, marker lights, brake lights and LED amber strobe light; lights are completely sealed and last approximately 10,000 hours
Hoist Material Handling’s line of BIG TRUCKS starts with a strong foundation. The modular design of the PE-Series provides excellent serviceability without sacrificing strength or durability. The PE-Series has been designed and tested to meet or exceed current, worldwide regulations for stability, sound levels and safety.
Anchoring the PE-Series is the 100%-welded steel chassis, which boasts heavy steel cross supports to distributing weight evenly throughout the truck. Bolt-on components, such as hydraulic tanks, provide additional durability and optimal heat dissipation, as well as easy removal and attachment for repairs or shipping. Integrated lifting points also allow for safe handling and transport.
Did you know that many other lift truck manufacturers lose as much as 2,500 lbs. (1 ton) on the rated capacity when adding a feature such as a side-shifting fork positioner? Not on a PE-Series. You receive the full rated capacity even if you add a feature such as a side-shifting fork positioner.
AxleTech Drive Axle
- Planetary drive axle rated for durability in high-capacity, off-road applications
- Force-cooled outboard wet disc actuated brakes reduces premature wear, extending life of brakes
- Brakes can be serviced through the wheel ends without removing entire drive axle
- Drive axle is bolted and dowel-pinned in the chassis
Industrial Steer Axle
- Thick top plate on welded beam steer axle provides added strength and durability
- Highly maneuverable in tight areas
- Dual-action bolt on cylinder is protected by heavy steel support beams and provides effortless power steering
- Lower maintenance costs due to minimal amount of moving parts
- Easy-access lubrication points
- Sealed tapered roller bearings
- High-impact greaseable composite trunnions
- Two-part rust-inhibiting polyurethane base coat and two-part polyurethane top coat for corrosion protection
- Majority of components are powder-coated, which is up to 10 times thicker than traditional spray paint resulting in greater scratch and chip resistance
- Environmentally friendly; produces virtually no volatile organic compounds (VOCs)
We understand the importance of being able to service your lift truck easily and efficiently. Whether it’s routine maintenance or on-site service call, the PE-Series is designed to allow easy access to all integral components to minimize downtime. Easy-lift hoods, panels and doors give technicians immediate access to vital service points. The innovative hydraulic multi-gauge provides quick and easy pressure readings with a simple twist of the dial, eliminating the need to tap into individual hydraulic lines.
Every component on the PE-Series is sourced from a reputable U.S. vendor or manufactured by Hoist Material Handling. Utilizing the same domestic components throughout our product lines provides you with not only cost savings, but also rapid parts availability.
The PE-Series comes with a standard 12-month/2,000-hour warranty (parts and labor) with optional extended warranties up to 12,000 hours.
Utilizing CANbus technology, RemoteTech is a vehicle management system incorporated into the PE-Series that provides onboard diagnostics and vehicle functions through a master digital display unit. RemoteTech’s master digital display unit replaces gauges, such as speedometer, fuel and engine temperature, allowing comprehensive vehicle monitoring from a central hub.
Vehicle functions, such as lifting and vehicle speeds, can be quickly adjusted remotely in just a few minutes. Service technicians can also quickly detect issues through RemoteTech’s master digital display unit and view or download the vehicle’s fault code history.
- Unlike similar systems that rely on third-party companies to program and troubleshoot the system, RemoteTech is programmed and operated by Hoist Material Handling.
- Automatically detects issues such as clogged filters, vehicle overload and more
- Decreases downtime and repair costs by detecting and resolving issues early
- Parameters such as lifting speeds and fingertip control functions can be quickly and easily customized to fit operator preference
- Ideal for fleet management; records service intervals and operator usage